Heat generator
According to the Non-domestic building services compliance guide, 2013 edition, published by HM Government, the term ‘heat generator’ refers to ‘…a device for converting fuel or electricity into heat – e.g. a boiler or radiant heater.’
Commonly used heat generators include:
- Gas, solid fuel or oil boilers.
- Solid fuel burners.
- Combined heat and power (CHP) plant.
- Direct electrical heaters .
- Direct gas heaters.
- Heat pumps.
For more information see: Building heating systems.
Heat generator efficiency is the ‘…useful fuel heat output divided by the energy input in the fuel (based on gross calorific value) or electricity delivered to the heat generator, as determined by the appropriate test methods for that type of heat generator.
Heat generator seasonal efficiency is ‘…the estimated seasonal heat output from the heat generator divided by the energy input. This will depend on the heat generator efficiency and the operating mode of the heat generator over the heating season. For example, in the case of boilers it is a ‘weighted’ average of the efficiencies of the boiler at 30% and 100% of the boiler output. For other technologies the heat generator seasonal efficiency may be the same as the heat generator efficiency.’
'Heat efficiency credits are awarded for the provision of additional measures, such as additional controls, that raise the energy efficiency of the system and go beyond recommended minimum standards. Different credits apply to the different measures that are available for heating and hot water technologies.’
'Effective heat generator seasonal efficiency is obtained by adding heating efficiency credits, where applicable to the heat generator seasonal efficiency:
| 'Effective heat generator seasonal efficiency = heat generator seasonal efficiency + heating efficiency credits.' |
See also: Heating appliance.
[edit] Related articles on Designing Buildings
- Building services compliance with the building regulations.
- Building services.
- Condensing boiler.
- Corrosion in heating and cooling systems.
- Domestic building services compliance guide.
- Gross calorific value.
- Heat pump.
- Heat recovery.
- Heat transfer.
- Heating.
- Heating appliance.
- Non-domestic building services compliance guide.
- Radiant heater seasonal efficiency
- Radiant heating.
- Space heating system.
- Thermal comfort.
- Underfloor heating.
Featured articles
Check out some of the best features and news from Designing Buildings as well as key stories from around the web.
Building Safety Act implementation in Wales
CIAT to host industry panel on 26 June.
New and updated CLC building safety guidance.
New UK National Buildings Database.
Building Safety Wiki Interviews
Chief executive of the British Woodworking Federation.
Planning condition discharge in England and Wales
A brief explanation from a building compliance expert, with further links.
Overheating guidance and tools for building designers
Guidance for dealing with element of building fabric control that have increasing importance.
Shading for housing, a design guide
From the Good Homes Alliance and British Blind and Shutter Association.
UK Standard Skills Classification (SSC)
A shared framework for describing skills needs.
Social media ban consultation comes to close
CIOB urges UK Government to consider social media’s role in careers guidance in ban debate.
The latest of eight Skills England apprenticeship units
The addition of battery manufacturing welcomed by ECA with a warning about the risks of fast-tracked apprenticeship units.
Building Control Independent Panel final report
A precis of a key report led by Dame Hackitt with full recommendations and link to the government response.